The California Air Resources Board today announced that Cummins paid $500,000 for failing to properly retest its engines already in use.
Cummins violations include:
* Not testing at least four engines in selected engine families;
* Completing tests after the deadline set in a 1998 settlement agreement for a previous air quality infraction;
* Reporting test results more than 30 days after test completion; and,
* Testing 10 vehicles at less than the maximum weight, as designated in the terms of a 1998 agreement.
CARB determined that while Cummins satisfied the intent of the engine testing provisions, the company failed to ensure that all settlement provisions were met.
CARB, working with U.S. EPA, discovered this most recent offense during an investigation regarding Cumminsâ€š delivery of approximately 570,000 diesel engines without exhaust
aftertreatment devices between 1998 and 2006, a violation of the Clean Air Act.
The California Air Pollution Control Fund, established to mitigate various sources of pollution through education and the advancement and use of cleaner technology, received $125,000, while the U.S. EPA collected an additional $375,000.
“Every ounce of pollution counts,” said CARB Enforcement Chief James Ryden. “Our laws exist for good reasons. All companies have to follow the rules and perform the required tests for the sake of our collective health.”
Printer Friendly Version
Email This Story
Supplier News: Related News
7/8/2011 – Cummins Pays $500,000 in Penalties to California, EPA
The California Air Resources Board today announced that Cummins paid $500,000 for failing to properly retest its engines already in use….
7/1/2011 – J.D. Power: Recent Class 8 Truck Quality May Temper Future Customer Satisfaction Gains
According to a study by J.D. Power and Associates, a coming ramp-up in production plus the release of new 2010 EPA-compliant engines may negatively impact truck quality.
Overall quality of heavy-duty trucks has improved substantially in 2011, compared with 2010, but whether these quality gains can be sustained in the face of greater production and new emissions regulations remains in question, according to the J.D. Power and Associates 2011 U.S. Heavy-Duty Truck Customer Satisfaction Study….
7/1/2011 – GITI Tire Opens Distribution Center in Tennessee
GITI Tire USA has opened a distribution center in Portland, Tenn., to help support the company’s growing footprint in the U.S….
6/30/2011 – Navistar Donates Vehicle To Assist In Alabama Rebuilding Efforts
Navistar donated a used step van valued at $20,000 to the Hale Empowerment and Revitalization Organization in Hale County, Alabama, to assist rebuilding efforts in the wake of the devastating tornadoes….
6/29/2011 – Westport Signs Agreement with GM to Research Natural Gas Engine Tech for Light-Duty Vehicles
Westport Innovations has entered into an agreement with General Motors to help develop advanced natural gas engine technology….
6/23/2011 – Accuride Buys Forgitron; S.C. Facility to Product Truck Wheels
Accuride Corp. has acquired substantially all of the assets of Forgitron Technologies LLC, including an 80,000-square-foot forged aluminum wheel manufacturing facility in Camden, S.C….
6/23/2011 – Alcoa Expands Wheel and Transportation Products Division
Alcoa Wheel and Transportation Products announced several personnel changes as part of an ongoing effort to expand business both internationally and into new market segments….
6/22/2011 – Navistar Awarded Diesel Re-Power Development Contract for USPS
Navistar has been awarded a development contract by the United States Postal Service under which Navistar will engineer a diesel powertrain replacement for USPS delivery vehicles….
6/15/2011 – Descartes Acquires Telargo
Descartes Systems Group, a logistics technology company, has acquired privately held Telargo, a provider of telematics solutions….
6/9/2011 – Daimler to Expand Production and Hire an Additional 1,400 Employees
at 3 Plants
Rising customer demand for new Freightliners and Western Stars is causing Daimler Trucks North America to plan sharply increased production and employment levels at its Mt. Holly, N.C., and Portland, Ore., truck manufacturing plants during the last half of 2011. …
6/8/2011 – Inland Truck Parts Expands Use of Mitchell 1 On-Line Repair Programs
Inland Truck Parts has begun using Mitchell 1 on-line repair information programs at its two newest locations, in Olathe and Wichita, Kans….
6/7/2011 – Bendix Assumes Exclusive Support of Brake Products As Roadranger Agreement Expires
Bendix Foundation Brakes are now exclusively supported by Bendix Commercial Vehicle Systems sales and service teams, following expiration of an agreement with the Roadranger organization….
6/6/2011 – Meritor Pledges $100,000 to The Henry Ford Education Pilot Program
Meritor Inc. is contributing $100,000 to The Henry Ford’s Innovation Education Incubator, according to Chip McClure, chairman, CEO and president. …
6/2/2011 – Volvo Powertrain Plans American Assembly of mDrive, I-Shift AMTs Next Year
Growing demand for automated mechanical transmissions in Mack and Volvo heavy trucks has caused Volvo Powertrain to plan assembly in the U.S. beginning in the third quarter of 2012….
5/31/2011 – Shipments Begin from Continental’s Flat Tread Production Facility in Mexico
Continental Tire the Americas has begun shipments of its flat precure treads from a new central manufacturing plant in Morelia, Mexico, with plans to eventually distribute the products throughout the Americas….
5/26/2011 – Wilson Trucking Gets the Keys to 500,000th Volvo Truck Assembled in U.S.
Volvo Trucks Wednesday presented Wilson Trucking Corporation of Fishersville, Va., with the keys to a brand new Volvo VNL 300, the 500,000th Volvo truck assembled in the United States….
5/25/2011 – FUSO Canter FE/FG Series Work Trucks Arrive at US Ports
Mitsubishi Fuso Truck of America announced that new Fuso 2012 model Canter FE Series medium-duty commercial trucks began arriving from Japan at ports in Baltimore, Jacksonville, San Diego and Tacoma in April….